Used RY-30 S7 (KF)
- Birel ART
- RY30 S7
- No de produit :
Used RY-30 S7 with the new S8 sticker kit (looks brand new). This kart was used by one of our race team drivers. It is very clean and was run with skid plates to minimize the wear of the chassis. We can sell it as a complete package, ready to race, with a rotax engine. Contact us for more info or pictures.
Partager ce produit :
Brake system The brake systems were updated both in the mixture of brake pads and in the treatment, especially the cast iron brake disc D.180 to improve the breaking and the wear.
Spindles: The spindle remains the classic ?2 pieces? with the introduction of a new thicker spindle stem made out of a more noble material with better characteristics. The main goal of the "H" stems will be to give more insertion increasing the grip on the front of the chassis.
Rear Axle: A variety of 8 axles are available for this chassis. We introduced the new ?R? axle that stands out for it's very good side seal, good stability under braking and optimal traction while leaving the kart very ?free?. From now on, the rear axles will be specifically produced for KF categories with only 4 keyways (for outer crown). The size of the KF axle is 50x2x1040mm.
Graphic kit: New Birel ART ?EVO? graphics, revised and improved for a modern and trendy look.
After testing, we recommend clients the use of the Tillett T-11t as an accessory for soft compound tires (MG yellow/white, VEGA white).
Adjustable ride height
Adjustable camber|caster pills (0,5 or 1,5°)
Front hubs: 25x85mm or 25x100mm
Rear hubs: 50x90mm or 50x115mm
4 Spindle stems hardness (from soft to hard): F - B - M - K
Black magnesium wheels
BirelART EVO graphic kit