Ricciardo kart DR01-KZ S9

Manufacturier
Birel ART
Modèle
DR01-KZ S9
No de produit :
B-RIC-DR01-KZ
300,00 $ USD
5 995,00 $ USD

DR01-KZ S9 Homologation 31/CH/20

Developed specifically for the shifter category, the DR01 S9 has a new front end that gives an aggressive look without losing the elegance that distinguishes the Ricciardo kart image.

The design of the spoiler was done through a CFD study to optimize its performance and aerodynamic efficiency.

Partager ce produit :

Caractéristiques

Details:

Wheels: In 2018, we introduce our new magnesium wheels (Mod. DM 130 + 210) LPC (Low Pressure Cast), manufactured with a particular fusion technology. The size will be different, especially in the rear with a wider total width and an off-set of 10mm.

Front bumper: New FREELINE F1 front bumper will be mounted as series on all the racing karts. It was studied and tested by CFD to improve air flow around the kart and driver allowing better brake cooling and reducing turbulence near the engine. On top of that, it gives an innovative and aggressive look.

Rear bumper: The S9 karts will come with the new rear KG CLOB model bumper.

Graphics: The sticker kit is updated for the new F1 front bumper. It will also have a little refresh without losing the aggressive and elegance look that distinguishes Ricciardo kart's image. 

Rear axles: F and B 50mm axles will be available in production for KZ-Shifter categories. They will now be 1060mm long.

Brake system: The brake system remains the strong and reliable RR-I25 calipers with the 22SRR master cylinder. You can choose between three options of brake pad materials and the adoption of cast iron brake disc D.180 to improve braking and reduce wear.

Spindles: Spindle stays the classic 2 piece with the choice of 5 spindle stems giving the possibility to add or remove grip on the front of the chassis.

Clutch lever: The vertically adjustable gear lever works on rollers allowing more precise shifting, while the driver can adjust the position to suit him best. 

Magnesium:  Front and rear hubs are available in magnesium. Fully machined rear short hubs d.40x100 mm or long d.50x115 mm double screw. Front hubs are 85mm long.
Spécifications techniques
  DR01-KZ S9
HOMOLOGATION  31/CH/20
FRONT STABILIZER STANDARD
REAR STABILIZER OPTIONAL
Ø TUBES D. 30mm
WHEEL BASE 1045mm
REAR WIDTH 645mm
FRONT WIDTH 725mm
LENGTH 1510mm
AXLE 50x2x1040 F
Ø SPINDLE D. 25mm
BRAKING SYSTEM HYDRAULIC RR
BRAKE POSITION REAR + FRONT
FRONT BRAKE DISC 150x12 G
REAR BRAKE DISC 180x16 G
TANK CAPACITY 10 L
STEERING WHEEL D. 340mm
DISK CARRIER 50mm AL.
FRONT HUBS 85mm AL. or 85mm MG.
REAR HUBS 50x90 AL. or 50x90 MG.
WHEELS DM130+DM210
PODS FL 12/17 EVO + FL F1