INCLUDED IN THE KIT: - Laptimer 6003 main computer and display unit
- Center fittings for mounting on the steering wheel
- Receiver (Magnet or IR)
- Active RPM sensor
- Speed kit for speed measurement, splits and more
- Water temperature sensor
FEATURES Easy and fast operation with the RIGHT number of buttons! Separated system. Keeps ALL cables except one AWAY from the steering wheel New double wide angle custom display for fast readout of all important informations Ultraslim black anodished display unit in a new design. Only 15 mm thick Logs 120 minutes of all available data up to 10 times per second Up to 8 splits per lap (no need for extra Loop, Magnet or IR)1 Stores up to 2000 laps (200 laps with 8 splits) Stores min/max temperature for input 1 - 3 per lap/split Stores min/max temperature for up to 4 infrared tire sensors per lap/split Stores min/max engine revolutions (RPM) per lap/split Stores min/max speed per lap/split1 Stores average environment temperature per lap/split Stores lap length per lap/split1 Stores tire number and engine number per lap/split Logs speed, RPM, temp. 1-3, position and brake 5 times per second for the 5 best laps Logs brake position, time, speed, RPM, temp. 1-3 up to 100 times per lap for the 5 best laps Readout of three of the following: 2 temperatures, RPM or speed1 Readout of lap number and laptime during the race Optional readout of splittimes during the race Readout of the deviation from the best laptime after passing the goal line Readout of the laptime order after passing the goal line. E.g. 3.th best time Indication of the best lap in the display Extreme sophisticated RPM filtering. Gives the markets best RPM result IrDA infrared communication directly from display to Data Analyser. Max. 12 seconds for everything! Infrared communication with IrDA protocol to PDA, Laptop, mobilphone or PalmPilot2 LEDs shows IrDA transmit/receive activity during transfer to Data Analyser Uses nonvolatile memory. Stores everything even without batteries 25 separate engine timers. Each up to 1000 hours 8 separate tire wear counters. Each up to 999 KM1 Engine timers and tire wear counters can be cleared and changed manually Two separate temperature inputs, +10°C to +610°C with around 0,5°C resolution One separate temperature input, 0°C to +800°C with around 2°C resolution Very long battery lifetime from two standard AA cells. Everything powered from the same batteries Three levels of low battery warning Laptime can be triggered by IR, Loop or Magnet User selectable 1, 2, 4, 6 or 8 stroke User selectable wheel circumference from 500 to 2000mm. 1mm resolution1 Both low and high retrig delay. Removes multiple trigs and too slow laps Independent warnings with high brightness LED for every temperature input Possible to use LEDs as RPM shiftlight. Delta RPM user selectable 25 different LED brightness levels USB connection directly from Laptimer to PC. Only 5 seconds for a full Laptimer! Automatic turns off after 5 minutes when the engine is not running User selectable number of magnets per lap. From 1 to 9 pieces User selectable number of magnets from pit to finishing line. From 0 to 8 pieces Readout of number of magnets before the finish line on the first lap Manual editing of number of magnets during the first lap Remembers highest temperatures, RPM and speed1 on last lap NOT finished! Advanced 4-layer PCB for considerable improved reliability and accuracy High quality connectors and cables Brake detector implemented in software. Works without a sensor on the brake pedal Engine RPM up to 25000. Measure accuracy of 25 RPM Speed up to 350 KMH. Measure accuracy of 0.5 KMH1 User selectable speed readout in KMH or MPH1 User selectable temperature readout in °C or °F Connector for external box with up to four infrared tire temperature sensors or G-force sensor Possible to use magnets as split points Split points can be entered manually1 Split points can be entered during driving1 Changes automatic to running mode when the engine is started UNDO function. Possible to undo laps and logs after new splits and clear all User software update from Data Analyser or USB. Downloaded from our homepage Service mode readout of temperature 1-3, RPM and speed on lap not finished Service mode readout of lap length for every lap1 Service mode readout of theoretic best laptime Service mode readout of up to 4 real-time tire temperatures Service mode readout of X-Y values from G-force sensor Service mode readout of battery voltage, last battery lifetime and current use in percent Service mode readout of total laps, total running distance, total power on and total ontime Service mode readout of Laptimer information like serial number, manufacture date and SW version Separate processor in the display unit. Possible to use other display units on the same Laptimer Free PC Analyser software Water resistant 1 years factory warranty |
$1,259.95cad
$1,195.00cad |
|
|
